Risk Factors

  • Personal Hygiene
  • Improper Holding
  • Contamination
  • Inadequate Cooking
  • Unsafe Food Source

What do these mean to me? [FDA.gov]


Violations

Code 2
2-103.11 (M) Person in Charge-Duties - PF A formal employee health policy does not currently exist. An example form 1-B was left with the manager at the time of the inspection.
Code 14
4-602.11 Equipment Food-Contact Surfaces and Utensils-Frequency - P Spray gun nozzle behind bar had mold build-up. Please clean more frequently. Clean utensil bin also had some food debris. Please store clean utensils in a protected location.
Code 26
7-102.11 Common Name-Working Containers - PF One spray bottle of bleach was labelled at the time of the inspection. Please ensure all chemicals are labelled with the common name on the working or storage container.
Code 20
3-501.16 (A)(2) and (B) Potentially Hazardous Food (Time/Temperature Control for Safety Food), Hot and Cold Holding - P Salmon in flip top cooler was a bit warm. All other foods were fine. Flip top cooler door was open and salmon was near front, closer to the grill area. Please keep the flip top door closed as much as possible to keep the temperature of foods in this unit below 45 at all times.
Code 45
4-501.11 Good Repair and Proper Adjustment-Equipment - C Gasket is split on flip top unit, and on one door of glass door cooler. Please have replaced.
Code 49
5-205.15 System Maintained in Good Repair - P Handsink behind bar is leaking and there is a leak from the kitchen into the basement. Bucket under leak in basement had overflowed onto the floor. Please repair plumbing.
Code 53
6-201.11 Floors, Walls and Ceilings-Cleanability - C Patch small holes in FRP near kitchen handsink to keep walls smooth and easily cleansable. 6-501.114 Maintaining Premises, Unnecessary Items and Litter - C There is a lot of unnecessary storage in the basement. This may provide rodent harborage areas. Please clean and remove as much as possible.

Previous Inspections

Inspection Type Score
Routine Inspection 97.5
Routine Inspection 98.0
Visit Comments
Verification Comments
Routine Inspection 90.0
Routine Inspection 96.0
Routine Inspection 97.0
Routine Inspection 97.0
Routine Inspection 95.5
Routine Inspection 96.5
Routine Inspection 97.5
Visit Comments
Routine Inspection 95.0
Visit Comments
Visit
Routine Inspection 94.0
Routine Inspection 92.0
Visit Comments
Critical Violation Followup Comments
Routine Inspection 92.0
Routine Inspection 92.0
Routine Inspection 96.0
Routine Inspection 95.5
Visit
Critical Violation Visit Comments
Routine Inspection 93.5
Routine Inspection 94.5
Routine Inspection 94.0
Routine Inspection 95.0
Routine Inspection 94.0
Routine Inspection 97.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Routine Inspection 100.0
Permit 100.0

43 total inspections